Licenses; Certificates; Logging - Bosch FLEXIDOME indoor 5100i User Manual

FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
Maintenance log
Download an internal maintenance log from the device to send it to Customer Service for
support purposes. Click Download and select a storage location for the file.
4.8.2

Licenses

This window activates more functions with use of an Activation key. An overview of the
Installed licenses is shown. Also, the Installation code of the unit is shown.
Click Set to apply the changes.
4.8.3

Certificates

Add a certificate/file to the file list
Click Add.
In the Add certificate window, select:
–
–
–
Note: When using certificates for mutual authentication, the device must use a solid and
trusted time base. In case the time differs too much from the actual time, a client can be
locked out. Then, only a reset to factory defaults will access to the device again.
Delete a certificate from the file list
Click the trashcan icon to the right of the certificate. The Delete file window appears. To
confirm deletion, click OK. To cancel deletion, click Cancel.
Note: You can only delete certificates that you have added; you cannot delete the default
certificate.
Download a certificate
Click on the download icon and a window opens with base64 encoded text of the certificate.
Click Set to apply the changes.
4.8.4

Logging

In this page:
–
–
Event Logging
Current log level
Select the level of event for which to display log entries or to log.
Software Sealing
Enable software sealing
Select this check box to enable software protection that prevents users from adjusting camera
settings. This function also protects the camera from unauthorized access.
Debug Logging
Retrieves detailed information of the active logs.
Bosch Security Systems B.V.
Upload certificate to select a file that is available:
– Click Browse... to navigate to the necessary file.
– Click Upload.
Generate signing request for a signing authority to create a new certificate:
– Fill in all the necessary fields.
– Click Generate.
Generate certificate to create a new self-assigned certificate:
– Fill in all the necessary fields.
– Click Generate.
Use the Filter field in each tab to search for specific log entries.
Use the dropdown menu to select the Number of displayed entries to be listed in the
current tab.
User manual
Configuration | en
11-2022 | V02 | F.01U.394.427
51