Privacy Masks; Audio - Bosch FLEXIDOME indoor 5100i User Manual

FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
Averaging period
Identifies how often (in seconds, minutes, hours, days or weeks) the encoder time is
synchronized to the actual time.
4.4.12

Privacy Masks

Privacy Masks block specific areas of a scene from being seen in the camera's field of view.
This can be useful when public spaces are in the coverage area or monitoring will be limited to
a particular zone.
Pattern
Select the color of the mask as it will appear in the live video: Auto, Black, Gray, White or
Custom color.
When Auto is selected, for one or more masks with a similar background, these will try to
blend with the surrounding color. If the backgrounds have different colors, the masks will
average between the colors.
A total of eight (8) masks can be in view at the same time.
To configure a Privacy mask:
To delete a Privacy mask:
4.4.13

Audio

You can set the gain of the audio signals to suit your specific requirements. The live video
image is shown in the window to help you check the audio source. Your changes are effective
immediately.
If you connect via Web browser, you must activate the audio transmission on the 'Live'
functions page. For other connections, the transmission depends on the audio settings of the
respective system.
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data is encoded according to the selected format and requires
additional bandwidth. If you do not want any audio data to be transmitted, select Off.
Audio
Enable or disable the audio recording option.
Audio input
Select which audio input you want to use. Available options are Line In or integrated
Microphone.
Microphone volume
Adjust the audio level with the slider(s). Adjust so that the indicator does not go into the red
zone.
Line Out
Adjust the audio level with the slider(s). Adjust so that the indicator does not go into the red
zone.
Bosch Security Systems B.V.
– Select the mask number from the drop-down list.
– Click the plus button.
– Adjust the mask in the image:
– Double-click on the edges to add or remove nodes.
– Click and drag the nodes to position them correctly.
– Check the Enabled check box to activate the related mask.
– Click the Set button to apply the related changes.
– Select the mask number from the drop-down list.
– Click the trashcan icon.
– Click the Set button to apply the changes.
User manual
Configuration | en
11-2022 | V02 | F.01U.394.427
33