Related Manuals for Bosch FLEXIDOME indoor 5100i
Summary of Contents for Bosch FLEXIDOME indoor 5100i
- Page 1 FLEXIDOME indoor 5100i (IR) | FLEXIDOME outdoor 5100i (IR) NDV‑5702‑A | NDV‑5703‑A | NDV‑5704‑A | NDV‑5702‑AL | NDV‑5703‑AL | NDV‑5704‑AL | NDE‑5702‑A | NDE‑5703‑A | NDE‑5704‑A | NDE‑5702‑AL | NDE‑5703‑AL | NDE‑5704‑AL User manual...
-
Page 3: Table Of Contents
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Table of contents | en outdoor 5100i (IR) Table of contents Browser connection System requirements Establishing the connection Password protection in camera System overview Live Playback Configuration Dashboard Operation via the browser Live page Playback page 3.2.1... - Page 4 FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Table of contents outdoor 5100i (IR) 4.5.3 Maximum Retention Time 4.5.4 Recording Scheduler 4.5.5 Recording Status 4.5.6 Recording Statistics 4.5.7 Image Posting 4.5.8 SD Card Status Alarm 4.6.1 Alarm Connections 4.6.2 Video Content Analysis (VCA) 4.6.3...
-
Page 5: Browser Connection
If you cannot connect, the unit may have reached its maximum number of connections. Depending on the device and network configuration, each unit can have up to 50 web browser connections, or up to 100 connections via Bosch Video Client or BVMS. Password protection in camera The device is password-protected. - Page 6 FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Browser connection outdoor 5100i (IR) – Minimum of 1 special character These special characters are not allowed: '@', '&', '<', '>', ':', '+' When you use Configuration Manager to access your device for the first time, you must set the initial password of the device in Configuration Manager.
-
Page 7: System Overview
Dashboard Click this icon to see detailed system information. Links Click this icon to navigate to the Bosch download store. Logout Click this icon to log out of the device. Click this icon to get context-sensitive help for the page you are browsing. -
Page 8: Dashboard
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | System overview outdoor 5100i (IR) Click the Set and Reboot button. The camera reboots and the changed settings are activated. Dashboard The Dashboard page is used to display detailed information about the device. -
Page 9: Operation Via The Browser
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Operation via the browser | en outdoor 5100i (IR) Operation via the browser Live page After the connection is established, the Live page is initially displayed. It shows the live video image on the right of the browser window. Depending on the configuration, various text overlays may be visible on the live video image. - Page 10 FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Operation via the browser outdoor 5100i (IR) Storage, CPU and network status When accessing the unit with a browser, the local storage, processor and network status icons are shown in the upper right of the window.
-
Page 11: Playback Page
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Operation via the browser | en outdoor 5100i (IR) Playback page Click Playback in the application bar to view, search or export recordings. This link is only visible when a direct iSCSI or memory card is configured for recording (with Video Recording Manager (VRM) recording this option is not active). -
Page 12: Dashboard
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Operation via the browser outdoor 5100i (IR) – Click the alarm jump buttons to go from one alarm event to the next or to the previous one. Red bars indicate the points in time where alarms were triggered. -
Page 13: Configuration
Certificate. A check mark in this check box indicates that at least one certificate is loaded onto the device. The Trusted certificate is a root certificate for Bosch Security Systems that proves that the device meets the following criteria: –... -
Page 14: Date/Time
5100i (IR) – It has not been tampered with. The Trusted certificate is issued by Escrypt. Escrypt is a Bosch company and Certificate Authority (CA). – Active Directory server (AD FS). A check mark in this check box indicates that the device uses an active directory server. -
Page 15: Web Interface
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) Note: It is important that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. Device time zone Select the time zone in which the system is located. - Page 16 FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Show VCA metadata When video content analysis (VCA) is activated, additional information is displayed in the live video stream. With the MOTION+ analysis type, for example, the sensor fields in which motion is recorded are marked with yellow rectangles.
-
Page 17: Live' Functions
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) Video buffer The value shown is calculated from the Latency mode setting. It cannot be changed. JPEG resolution Specify the size of the JPEG image on the Live page. The options are Small, Medium, Large (720p), Maximum, and Resource based (default). -
Page 18: Connectivity
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Video file format Select a file format for the live page display. The MP4 format does not include metadata. Click Set to apply the changes. Connectivity 4.3.1 Cloud services... -
Page 19: Dyndns
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) 4.3.3 DynDNS A dynamic Domain Name Service (DNS) allows you to select the unit via the Internet using a host name, without having to know the current IP address of the unit. You can enable this service here. - Page 20 FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) – Without HDR: Optimized for wide range of scenes based on single-exposure (default mode) The HDR sensor modes provide much improved dynamic range over the sensor modes without HDR, and provide maximum detail in all scenes, even in challenging scenes with dark and bright areas in the same shot.
-
Page 21: Display Stamping
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) – Use the slider to adjust the focus position. The focus position automatically adjusts to the autofocus. – Focus indicator – The Focus indicator shows a value related to the focus quality of the image: the greater it is, more in focus is the image. - Page 22 FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) – Stamping size Select the desired font size of the overlays on the OSD: Normal Large or Custom. Select Custom to enable the Font size (‰) field. –...
-
Page 23: Positioning
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) Select the position of the camera name overlay in the drop-down box. It can be displayed at the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to Off for no overlay information. - Page 24 FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Only through use of perspective information is it possible to distinguish objects such as persons, bicycles, cars and trucks, and accurately compute their real size and speeds as they move through 3D space.
- Page 25 FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) You can also combine this manual calibration with the values for roll angle, tilt angle, height and focal length calculated by the camera or entered manually. Select the Calculate check box to obtain the roll angle, tilt angle, height and focal length from the sketched calibration elements - vertical lines, ground lines and angles - you have placed in the camera.
-
Page 26: Scene Mode
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) The Coordinate system feature describes the position of the camera in a local Cartesian or the global WGS 84 coordinate system. The camera and the objects tracked by the video analytics are displayed on a map. -
Page 27: Color
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) Sodium lighting This mode can be used in applications with street (sodium vapor) lighting. A special white balance algorithm compensates for the yellow / orange color of the lights. -
Page 28: Alc (Automatic Level Control)
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) – Sodium lamp auto mode allows the device to continually adjust for optimal color reproduction in an environment with sodium vapor light sources (street lighting). – In Manual RGB mode the Red, Green, and Blue gain can be manually set to a desired position. -
Page 29: Illuminator
(positive) value means that the device switches to monochrome at a higher light level. 4.4.7 Illuminator Note: Only applicable to FLEXIDOME indoor 5100i IR and FLEXIDOME outdoor 5100i IR: NDV-5702-AL, NDV-5703-AL, NDV-5704-AL, NDE-5702-AL, NDE-5703-AL, NDE-5704-AL. Illuminator function Select the control setting for the illuminator: –... -
Page 30: Scene Mode Scheduler
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) 4.4.9 Scene mode scheduler The scene mode scheduler is used to determine which scene mode should be used during the day and which scene mode should be used during the night. - Page 31 The Active profile follows the scheduled profiles under Recording Profiles. Please refer to section Recording Profiles. This behavior is only applicable when using Bosch recording solutions, including edge recording or VRM recording. Third-party recording solutions might use the Non-recording profile.
-
Page 32: Encoder Statistics
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Target bit rate To optimize use of the bandwidth in the network, limit the data rate for the device. The target data rate should be set according to the desired picture quality for typical scenes with no excessive motion. -
Page 33: Privacy Masks
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) Averaging period Identifies how often (in seconds, minutes, hours, days or weeks) the encoder time is synchronized to the actual time. 4.4.12 Privacy Masks Privacy Masks block specific areas of a scene from being seen in the camera's field of view. -
Page 34: Pixel Counter
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Recording format Select a format for audio recording. The default value is 48 kbps. You can select 80 kbps, G.711 or L16 depending on the required audio quality or sampling rate. - Page 35 FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) Recording media Select a media tab to connect to the available storage media. iSCSI Media To use an iSCSI system as the storage medium, a connection to the desired iSCSI system is required to set the configuration parameters.
-
Page 36: Recording Profiles
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Formatting and wiping storage media Formatting the storage media can be necessary to delete all data and recreate a valid file structure to be usable. All recordings on a storage medium can be deleted at any time. Check the recordings before deleting and back-up important sequences on the computer's hard drive. -
Page 37: Maximum Retention Time
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) Standard recording Select the mode for standard recordings: – Continuous: the recording proceeds continuously. If the maximum recording capacity is reached, older recordings are overwritten automatically. – Pre-alarm: recording takes place in the pre-alarm time, during the alarm and during the post-alarm time only. -
Page 38: Recording Scheduler
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) 4.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be recorded. Schedules can be defined for weekdays and for holidays. -
Page 39: Image Posting
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) Recording Identifies the current recording profile (1 or 2). Zoom Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x). Averaging period Select the appropriate averaging period as a means of stabilizing the long term bit rate. -
Page 40: Alarm
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Set the alarm warning to a defined percentage of the lifespan. The alarms can be given as: – An audio alarm – An e-mail – A warning through the Video Management System If a SD card is not installed, ‘SD card not found’... -
Page 41: Video Content Analysis (Vca)
Detection of movement can be used to trigger an alarm and to transmit metadata. Various VCA configurations can be selected and adapted to your application, as required. Configure the VCA setting in the Bosch Configuration Manager. 4.6.3 Audio Alarm Alarms can be generated based on audio signals. -
Page 42: Alarm Email
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Signal Ranges Exclude particular signal ranges in order to avoid false alarms. For this reason the total signal is divided into 13 tonal ranges (mel scale). Check or uncheck the boxes below the graphic to include or exclude individual ranges. -
Page 43: Alarm Inputs
Click Send Now to test the e‑mail function. An alarm e-mail is immediately created and sent. Click Set to apply the changes. 4.6.5 Alarm Inputs Note: Only applicable to FLEXIDOME indoor 5100i IR and FLEXIDOME outdoor 5100i IR: NDV-5702-AL, NDV-5703-AL, NDV-5704-AL, NDE-5702-AL, NDE-5703-AL, NDE-5704-AL. Active Configure the alarm triggers for the unit. -
Page 44: Alarm Task Editor
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) 4.6.7 Alarm Task Editor Editing scripts on this page overwrites all settings and entries on the other alarm pages. This procedure cannot be reversed. To edit this page, you should have programming knowledge and be familiar with the information in the Alarm Task Script Language document and the English language. - Page 45 FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) IPv6 IP address Enter the desired IP address for the camera. The IP address must be valid for the network. Prefix length Enter the appropriate prefix length for the set IP address.
-
Page 46: Advanced
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Discovery port (0 = Off) Enter the number of the port that you want to discover. To deactivate the port, enter 0. Interface mode ETH If necessary, select the Ethernet link type for interface ETH. Depending on the device connected, it may be necessary to select a special operation type. - Page 47 FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) 1. SNMP host address / 2. SNMP host address If you wish to send SNMP traps automatically, enter the IP addresses of one or two required target units here.
-
Page 48: Multicast
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) 4.7.5 Multicast The device can enable multiple receivers to receive the video signal simultaneously. The stream is either duplicated and then distributed to multiple receivers (Multi-unicast), or it is sent as a single stream to the network, where it is simultaneously distributed to multiple receivers in a defined group (Multicast). -
Page 49: Ipv4 Filter
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) Duplication of data places a heavy demand on the CPU and can lead to impairment of the image quality under certain circumstances. Port Enter the port address for the stream here. -
Page 50: Service
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Service 4.8.1 Maintenance Notice! Before starting a firmware update, make sure to select the correct upload file. Do not interrupt the firmware installation. Even changing to another page or closing the browser window leads to interruption. -
Page 51: Licenses
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Configuration | en outdoor 5100i (IR) Maintenance log Download an internal maintenance log from the device to send it to Customer Service for support purposes. Click Download and select a storage location for the file. -
Page 52: System Overview
FLEXIDOME indoor 5100i (IR) | FLEXIDOME en | Configuration outdoor 5100i (IR) Diagnostics This tab lists the individual diagnostics routines and their respective values. Reload Reloads the displayed entries. Download log Click Download log to save a copy of the entries from the device to a computer. -
Page 53: Troubleshooting
FLEXIDOME indoor 5100i (IR) | FLEXIDOME Troubleshooting | en outdoor 5100i (IR) Troubleshooting Physical reset button Each camera has a hardware reset button. You may need to press the reset button to reset the camera to factory defaults if you encounter the following circumstances: –... -
Page 54: Appendices
– Repair & Exchange – Product Security Bosch Building Technologies Academy Visit the Bosch Building Technologies Academy website and have access to training courses, video tutorials and documents: www.boschsecurity.com/xc/en/support/training/ 11-2022 | V02 | F.01U.394.427 Bosch Security Systems B.V. User manual... - Page 56 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2022 Building solutions for a better life. 202211021604...
Need help?
Do you have a question about the FLEXIDOME indoor 5100i and is the answer not in the manual?
Questions and answers