Illuminator; Enhance - Bosch FLEXIDOME indoor 5100i User Manual

FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
–
Day/night
Select the appropriate mode from the drop-down list.
–
–
–
Day-to-night switchover
Adjust the slider to set the video level at which the device in Automatic exposure mode
switches from color to monochrome operation.
A low (negative) value means that the device switches to monochrome at a lower light level. A
high (positive) value means that the device switches to monochrome at a higher light level.
4.4.7

Illuminator

Note: Only applicable to FLEXIDOME indoor 5100i IR and FLEXIDOME outdoor 5100i IR:
NDV-5702-AL, NDV-5703-AL, NDV-5704-AL, NDE-5702-AL, NDE-5703-AL, NDE-5704-AL.
Illuminator function
Select the control setting for the illuminator:
–
–
–
–
Intensity level
Set the intensity of the IR beam.
4.4.8

Enhance

High dynamic range
Select one of the available High dynamic range options below:
–
–
–
Backlight compensation
–
–
Contrast enhancement
The slider adjusts the contrast enhancement level between 0 and +15.
Sharpness level
The slider adjusts the sharpness level between -15 and +15. The zero position of the slider
corresponds to the factory default level.
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more
detail. Extra sharpness can enhance the details of license plates, facial features and the edges
of certain surfaces but will increase bandwidth requirements.
Bosch Security Systems B.V.
In the Manual mode, the precise F-stop of the lens can be selected with the slider.
Auto - the device switches the IR cut-off filter on and off depending on the scene
illumination level.
Color - the device always produces a color signal regardless of light levels.
Monochrome - the IR cut-off filter is removed, giving full IR sensitivity.
On: the illuminator is always on.
Off: the illuminator is always off.
Auto: the device automatically switches between illuminator modes.
Intelligent: the device automatically switches between illuminator modes and adjusts
lighting intensity to make sure the image is captured with the correct exposure level and
minimal loss of detail.
Off - The device is in single exposure mode and the user does not have an increased
dynamic range through HDR.
Optimized DR - Select this mode for scenes with greater dynamic range requirements.
Extreme DR - Further increases performance at an even greater HDR ratio. Due to the
increased HDR ratio, there is a greater risk of HDR artifacts in the scene and on moving
objects.
Select Off to switch off backlight compensation.
Select On to capture details in high-contrast and extremely bright-dark conditions.
User manual
Configuration | en
11-2022 | V02 | F.01U.394.427
29