Connectivity; Cloud Services; Accounts - Bosch FLEXIDOME indoor 5100i User Manual

18 en | Configuration
Video file format
Select a file format for the live page display. The MP4 format does not include metadata.
Click Set to apply the changes.
4.3

Connectivity

4.3.1

Cloud services

Remote Portal
Operation
The operation mode determines how the camera communicates with the Remote Portal.
–
–
Connectivity state
This field indicates the device's connectivity state with Remote Portal.
–
Note: The Visit Remote Portal button will become active.
–
Note: The Register button will become active only if you have not registered the device to the
Remote Portal.
4.3.2

Accounts

Four separate accounts can be defined for posting and recording export.
Type
Select the account type.
Account name
Enter an account name to be shown as the target name.
IP address
Enter the IP address for an FTP server.
Login
Enter your login name for the account server.
Password
Enter the password that gives access to the account server. Click Check to confirm that it is
correct.
Path
Enter an exact path to post the images on the account server. Click Browse... to browse to the
required path.
Maximum bit rate
Enter the maximum bit rate in kbps that will be allowed when communicating with the
account.
Encryption
Tick the box to use a secure FTP over TLS connection.
Click Set to apply the changes.
11-2022 | V02 | F.01U.394.427
Select On to poll the server constantly.
Select Off to block polling.
If the device is registered and the operation mode is set to On, the state will indicate that
the device is Connected (to the cloud service).
If the device is not registered or the operation mode is set to Off, the state will indicate
that the device is Not available.
User manual
FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
Bosch Security Systems B.V.