Table of Contents
Advertisement
5-3-2
System List display
Only the necessary units can be displayed by specifying the refrigerant circuit range. This is
convenient when you want to display only the objective unit in the state in which a large num-
ber of units are connected to the system.
Refrigerant circuit selection field
Specifies the refrigerant circuit address.
When "All" is selected, all refrigerant circuits are displayed.
In addition, when Ref. No. is selected by clicking [ ▼ ] button,
only the selected refrigerant circuit is displayed in a list.
Display Option button
Selects display / hidden for the item (column) displayed at list
area.
Checked ...display, Unchecked ...hidden
CSV button
Saves the specified data to a CSV file.
Menu display by right click
When the line of unit on System List screen is right-clicked, the following menu is dis-
played. Click the menu you want to operate.
•
Operation Setting (only when indoor unit is selected)
On: Turns the operation status On. Off: Turns the operation status Off.
Detail: Displays the Operation Setting screen.
•
Diagram
Shifts to Detail Diagram screen.
•
History
Shifts to Operation History screen.
68
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
Advertisement
Table of Contents
