Table of Contents
Advertisement
4-6-1
Register User
Registers new user ID and password. A data acquisition application start user can be added.
User ID input field
Input the user ID. (Up to 20 alphanumeric characters) (*1)
Password input field
Input the password. (Up to 20 alphanumeric characters) (*1)
Password confirmation input field
For confirmation, input the password again. (Up to 20 alphanumeric characters) (*2)
Register button
Registers the inputted contents. (*3)
Close button
Closes this screen.
*1 If the user ID and password input fields are not inputted, an error message is
Note
displayed.
*2
If there is a difference in the password and password confirmation input con-
tents, an error message is displayed.
*3
If the same user ID is already registered, an error message is displayed.
(0
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
Advertisement
Table of Contents
