How To Connect Connectors - Mitsubishi Electric AJ65VBTCU-68DAVN User Manual

4 SETUP AND PREPARATION BEFORE OPERATION

4.8.2 How to connect connectors

4 - 13
POINT
• On this unit, use the Ver. 1.10-compatible CC-Link dedicated cable (FANC-
110SBH, CS-110, FA-CBL200PSBH).
You cannot use the Ver. 1.10-compatible CC-Link dedicated cables of other than
the above types, CC-Link dedicated cables and CC-Link dedicated, high-
performance cables.
• The shield cable of the CC-Link dedicated cable should be connected to "SLD" in
each module, and both ends should be grounded through "FG".
SLD and FG are connected inside the module.
The following shows how to connect the one-touch connectors and online connectors.
POINT
For how to connect/disconnect the online connectors, refer to the manuals included
with the connectors.
MELSEC-A
4 - 13