Yamaha YS928J Owner's Manual page 58

PERIODIC MAINTENANCE
2. Loosen the wheel nut on both sides.
1. Wheel nut
3. Loosen the locknut, and adjust the
track slack by turning the adjusting bolt.
1. Locknut
2. Adjusting bolt
Direction A
Direction B
TIP
Turn the adjusting bolts so that the left and
right tracks have the same slack.
4. Tighten the locknuts and wheel nuts to
the specified torques.
B
A
Slack
Increase
Decrease
Tightening torque:
Locknut:
25 Nm (2.5 m·kgf, 18 ft·lbf)
Wheel nut:
53 Nm (5.3 m·kgf, 38 ft·lbf)
– 54 –