Fuses; Skid - Yamaha YS928J Owner's Manual

CONTROL FUNCTION

FUSES

1
1. Fuse cover
2. Fuse
3. Spare fuse
The fuses are located behind the right side
cover.
Fuse capacity:
30 A (blade-type fuse)

SKID

2
3
1. Skid
2. Auger end
3. Road surface
4. Clearance
Skid is used to determine a clearance
between the auger end and the road sur-
face. Adjust the clearance according to
road surface conditions (see page 50).
NOTICE
If the clearance between the road sur-
face and the auger end is too small,
auger wear may increase and the road
surface could be damaged.
Factory set
(Standard position)
Concrete and asphalt
roads
Pebble and gravel
roads
– 21 –
1
2
Clearance between
the auger end and
the road surface
5 mm (0.197 in)
Decrease
Increase
4
3