Table of Contents
Advertisement
Operation
WARNING
To avoid personal injury, follow these
procedures:
• Become familiar with all operating and
safety instructions in the Operator's
Manual for your machine before using this
attachment.
• Before doing any of the following
procedures or leaving the operator's
position:
– Disengage the machine PTO, move the
motion control levers to the neutral
locked position, and set the machine
parking brake.
– Shut off the engine, remove the key, and
wait for all moving parts to stop.
• Do not remove the bag while the engine is
running.
• Always shut off the engine, wait for all
moving parts to stop, and remove the key
before clearing an obstruction from the
bagging system.
• Do not do maintenance or repairs while the
engine is running.
Removing the Bagger from
the Machine
1.
Disengage the machine PTO, move the motion
control levers to the neutral locked position and
set the machine parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Lift the latches and remove and empty the grass
bag.
4.
Lift the back plate off of the mower.
5.
Lower the grass deflector back into place.
Emptying the Bagger
1.
Disengage the PTO, bring the machine to
neutral position and set the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Lift the latches and remove and empty the grass
bag.
4.
Insert the lower pins of the bagger frame into the
holes in the back plate
5.
Lift the latches and slide the frame side pins into
them
(Figure
8).
6.
Lower the latches to secure the bagger.
Clearing Obstructions
WARNING
When the machine is in operation, the blade
can be rotating and cut off or injure hands.
• Before adjusting, cleaning, repairing and
inspecting the blower, or unclogging the
chute, shut off the engine, wait for all
moving parts to stop, and remove the key.
• Use a stick, not your hands, to remove an
obstruction from the blower and tube.
• Keep your face, hands, feet, and any other
part of your body or clothing away from
concealed, moving, or rotating parts.
1.
Disengage the PTO, move the motion control
levers to the neutral locked position and set the
parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Lift the latches and remove and empty the grass
bag.
4.
Use a stick or similar object, not your hands
to remove and clear the obstruction from the
mower.
5.
Insert the lower pins of the bagger frame into the
holes in the back plate
6.
Lift the latches and slide the frame side pins into
them
(Figure
8).
7.
Lower the latches to secure the bagger.
9
(Figure
8).
(Figure
8).
Advertisement
Table of Contents
