Table of Contents
Advertisement
3
Installing the Bagger onto
the Mower
Parts needed for this procedure:
1
Bagger clamp
1
Bolt (3/8 x 1 inch)
1
Locknut (3/8 inch)
Procedure
WARNING
An uncovered discharge opening could allow
the lawn mower to throw objects toward you
or bystanders, resulting in serious injury.
Also, contact with the blade could occur.
• Do not operate the machine without the
bag installed or the grass deflector down.
• Ensure that the grass deflector is down
when the back plate and bag are removed.
Note:
In the steps below, the bolts are threaded
into the mower deck. Remove the nuts first before
removing bolts.
1.
Lift the grass deflector all the way up.
2.
Position the front hook on the bagger mounting
bracket into the front slot of the mower mounting
bracket
(Figure
6).
3.
Place the rear hook over the mower mounting
bracket
(Figure
1. Front hook
2. Rear hook
7
6).
Figure 6
3. Front slot
4. Mower mounting bracket
g002160
Advertisement
Table of Contents
