Siemens SIMOTICS S-1FK2 Configuration Manual page 86

Technical data and characteristics
6.1 Explanations
The maximum torque that can be briefly achieved using this Motor Module is listed in the tables
of this manual as M
• When configuring intermittent or overload operation, check whether a larger Motor Module
is required to provide the necessary peak current.
Tolerance data
The characteristic data listed in the data sheets are subject to a certain amount of scatter. The
following tolerances apply to the characteristic data:
Current values
Torque values
Moment of inertia
Tolerance data in the motor list data
The torque-speed characteristics specified in the following chapter relate to the nominal values
at operating temperature.
84
.
max inv
Motor list data
I I
0, rated,
M M
0, rated,
J
Typ. value
I ± 3 %
max
M ± 3 %
max
± 2 %
Mot
1FK2 Synchronous Motors for SINAMICS S120
Configuration Manual, 02/2022, A5E46927724B AD
Max. value
± 7.5 %
± 7.5 %
± 10 %