Toro 132-7169 Installation Instructions

Tip Switch Kit
TR-34D Trench Roller
Model No. 132-7169
This product contains a chemical or chemicals known to the State of California to
Installing the Tip Switch
Preparing the Machine
1. Set the parking brake, open the hood panels, and
remove the right side panel; refer to the Owner's Manual
of the machine.
2. Disconnect and remove the battery and battery bracket
(Figure 1).
Important: Remove the negative terminal first.
1. Bolts securing the battery bracket
3. Remove the 4 bolts on panel holding the electrical
terminal box (Figure
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
Figure 1
2).
Register at www.Toro.com.
WARNING
CALIFORNIA
1. Bolts
4. Lift the electrical terminal box and remove the engine
wiring harness
1. Engine wiring harness
Form No. 3396-989 Rev A
Installation Instructions
Figure 2
(Figure 3).
Figure 3
Original Instructions (EN) All Rights Reserved *3396-989* A
Printed in the USA.