Roller Assembly
Groundsmaster
Model No. 132-6113
This product contains a chemical or chemicals known to the State of California to
Installation
1. Move the machine to a level surface, shut off the
engine, and engage the parking brake.
2. Remove and discard the existing fasteners (2 bolts and
2 nuts) from the mower deck as shown in
1
1. Existing bolts and nuts (nuts shown)
3. Install the roller bracket onto the mower deck with
2 carriage bolts (5/16 x 7/8 inch) and 2 nuts (5/16
inch) from loose parts using the holes from which you
removed the existing fasteners in step 1
Tighten the fasteners firmly.
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
4000 or 4010 Series Rotary Mower
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
Figure
g033880
Figure 1
(Figure
Register at www.Toro.com.
WARNING
CALIFORNIA
1.
1
1. Nuts (5/16 inch)
2. Roller bracket
4. Install the 2 self-tapping bolts through the roller
bracket and into the mower deck as shown in
Tighten the self-tapping bolts firmly.
2).
Form No. 3398-315 Rev A
Installation Instructions
2
3
Figure 2
3. Carriage bolts (5/16 x 7/8
inch)
Original Instructions (EN)
All Rights Reserved *3398-315* A
Printed in the USA
g033881
Figure
3.