Mounting Procedures; Mounting The Ipc On A Din Rail - GE PACSystems RXi Box IPC User Manual

Mounting Procedures

Using the optional ICRXIACCBPL Backplate, the IPC can be mounted on a DIN rail or a panel. You
can also mount the IPC directly onto a panel without using a Backplate.
The IPC has four captive machine screws in its base for attaching the unit to the Backplate or
panel.

Mounting the IPC on a DIN Rail

You will need the following:
When installed on the Backplate, the IPC mounts to a standard EN 50022 DIN rail with the
following dimensions.
Backplate Orientation
The Backplate should be installed with the static latches on top and the spring-loaded latches at
the bottom.
Backplate, Rear View
14
One 2.5mm hex driver (included with the RXi IPC)
One flathead (or large Phillips) screwdriver
One Backplate, ICRXIACCBPL
Static Latches (Top)
Spring-loaded Latches (Bottom)
Hardware Installation
PACSystems* RXi Box IPC GFK-2785C