KIT Mode
Playing imported audio files as Inst sounds
You can import an audio file to play as an Inst.
Select an audio file saved on a USB flash drive to import into the DTX-PRO.
1.
Save the audio file from the computer to the root directory on a USB flash drive.
Audio file conditions: wav format
• Note that some wav format audio files may not be imported.
• The DTX-PRO does not recognize the audio file if it is in a folder.
• You can also import an audio file as a voice. When doing so, you can play a different wave for each zone.
• In MENU/Job/User voice, you can import multiple audio files into a single user voice to play different waves in response to the velocity.
2.
Connect a USB flash drive to the [USB TO DEVICE] terminal on the rear panel.
3.
Press the button below "INST" ([F1]).
The Inst Selection screen appears.
DTX-PRO Reference Manual
83