Trigger - Yamaha DTX-PRO Reference Manual

MENU Button
TriggerTrigger

TRIGGER

This section explains the "Trigger" settings in the menu. The characteristics of the trigger signals output from pads when they are played
depend on a range of different pad design factors.
The "Trigger" settings allow you to optimize trigger signals for each pad for processing by the DTX-PRO.
Select the appropriate pad type when you add or change pads. When you connect the pad to the [!2 K ICK/!3 2 ] jack, [yTOM3/u] jack,
[rTOM2/t] jack or [wTOM1/e] jack, make sure to change the input mode.
TRIGGER/SETTING
MENU/Trigger
TRIGGER/SETTING/Input Mode
Input Mode
Sets how to use the mono × 2 input jack. Select "paired" when using a Drum Trigger (DT50S) or similar device.
MENU/Trigger/Input Mode
Screen
Input Mode
Curve
Pad Type
Crosstalk
Parameter Settings
Tom1/Pad3 paired,
separate
Tom2/Pad5
Tom3/Pad7
Kick/Pad13
Description
Sets the [wTOM1/e] jack to use wTOM1 and
e trigger inputs as a set or separately.
Sets the [rTOM2/t] jack to use rTOM2 and
t trigger inputs as a set or separately.
Sets the [yTOM3/u] jack to use yTOM3 and
u trigger inputs as a set or separately.
Sets the [!2 K ICK/!3 ] jack to use !2 K ICK and
!3 trigger inputs as a set or separately.
DTX-PRO Reference Manual 34