Yamaha DTX-PRO Reference Manual page 73

MENU Button
4.
(File)
Select the file you want to load.
4-1.
Use the " " and "
you want to load. Only those files matching your selected file type will be available for loading.
4-2.
For OneKit, select the kit you want OneKit to load to.
Use the " " and "
the file you want to load. When the kit contains user waves, the user waves are also loaded.
5.
Press the "LOAD" button ([F3]).
The Load confirmation screen appears.
6.
Press the "YES" button ([F1]) to load.
The message shown below appears during the Load process.
Press the "CANCEL" button ([F3]) during the Load process and the screen returns to step 2.
Do not disconnect the USB flash drive from the [USB TO DEVICE] terminal or turn off the power to the DTX-PRO while the file is
being loaded. Doing so may cause the DTX-PRO to malfunction, or corrupt memory in the USB flash drive.
"Completed." appears when the Load process is complete, and the screen returns to step 2.
" buttons ([F1] and [F2]) to move the cursor to "File," and then use the [–][+] controllers to select the file
" buttons ([F1] and [F2]) to move the cursor to the kit number, and then use the [–][+] controllers to select
DTX-PRO Reference Manual 73