AB B ABI LIT Y™ SM ART S ENSO R BLU ETOOTH ® G AT EWAY General The ABB Ability™ Smart Sensor gateway is used to upload the Smart Sensor data automatically to the Smart Sensor portal. The gateway needs to be configured for Internet access before it can start reading the Smart Sensors.
Once the configuration is done, it can be verified from the status page. established to Access Controller the AC Online Time is shown. Figure 15 Gateway with FW 2.1.0 connected to gw.smartsensor.abb.com If the AC Online Time is not shown within few minutes:...
Page 22
Connection to Access Controller can be verified with Debug Tools in Other tab: To check the connection to the Access Controller, select NetCat, add Address gw.smartsensor.abb.com (or gw.smartsensor.abb.com.cn in case of China), Pro- tocol TCP, Timeout 2, Port 443 and press Start.