Table of Contents
Advertisement
Chapter 2 Convenient Features
Option
Check previous System
Config
BMC IRQ
Post Error Pause
Memory Error
Power Switch Inhibit
CLI SETUP
68
Parameter
[Disabled]
Enable or disable the feature to detect system
configuration change.
Enabled
If this option is set to Enabled and the system
configuration differs from the previous boot, the system
stops before OS booting and displays confirmation
message whether to continue booting. At this time,
POST pauses until user's response is made.
Disabled
Specify whether to allocate interrupt lines for BMC
(Baseboard Management Controller).
[IRQ 11]
Disabled
Enable or disable the feature to suppress OS booting
when POST detects an error, until user's response is
[Enabled]
made.
When set to Disabled, continues OS booting
regardless of user's response even if an error is
detected during POST.
Halt
Enable or disable the feature to suppress OS booting
when POST detects a memory degradation error, until
[Boot]
user's response is made. This option is valid only when
POST Error Pause is set to Enabled. Even if this
option is set to Boot, POST stops to suppress OS
booting if all of the memory resources are degraded.
[Disabled]
Enable or disable the POWER switch inhibit feature.
Enabled
[Disabled]
Enable or disable the Command Line Interface SETUP
feature. When this option is set to Enabled, the
Enabled
operation of SETUP is changed to use Command Line
Interface. To switch back to the menu operation, set this
option to Disabled.
Express5800/E120d-M Maintenance Guide
Descriptions
[
]: Factory settings
1. System BIOS
Advertisement
Table of Contents
