Table of Contents
Advertisement
Chapter 2 Convenient Features
(2) Memory Configuration submenu
From the Advanced menu, select Memory Configuration and then press the <Enter> key to display the menu
screen shown below. For the menu that has
to show its submenus.
For details about the options, see the table below.
Option
Memory Information
Hardware Memory Test
Memory Retest
Memory Frequency Limit
Memory Voltage
NUMA
Patrol Scrub
Demand Scrub
54
on the left, move the cursor to it and then press the <Enter> key
Parameter
–
–
[Disabled]
Enable or disable to execute memory test during POST.
If a memory error is detected while this option is set to
Enabled
Enabled, the relevant memory resource is degraded.
[No]
When this option is set to Yes, error information on
memory is cleared, and all DIMMs are reconfigured at
Yes
the next startup. No is automatically selected after
DIMMs are reconfigured.
[Auto]
Specify the upper limit of operating frequency of memory.
The operating frequency may be lowered than the
800 MHz
specified value depending on memory configuration.
1066 MHz
1333 MHz
1600 MHz
1.5 V
Specify the operating voltage of memory. The memory
voltage may differ from that specified in this parameter
[1.35 V]
depending on memory configuration.
Enable or disable Non-Uniform Memory Access feature.
Disabled
This option is displayed only in multi-processor
[Enabled]
configuration..
[Disabled]
Enable or disable memory RAS feature (Patrol
Scrubbing).
Enabled
Disabled
Enable or disable memory RAS feature (Demand
Scrubbing).
[Enabled]
Express5800/E120d-M Maintenance Guide
Descriptions
[
]: Factory settings
1. System BIOS
Advertisement
Table of Contents
