Ndis 2.01 Driver For Ibm Lan Services 4.0; Installation Procedure - HP Vectra VL6 7 Administrator's Manual

4 Installing Other Network Drivers

NDIS 2.01 Driver for IBM LAN Services 4.0

NDIS 2.01 Driver for IBM LAN Services 4.0
The PCnet driver may also be configured to run under the IBM LAN Server
environment. Although the IBM LAN Server software uses the same NDIS driver as
the Microsoft LAN Manager network operating system, the IBM LAN Server
software requires a unique NIF file from Microsoft's LAN Manager. This NIF file is
included on the LAN Disk.
The directory structure provided on the LAN Disk has been set up for automatic
installation. This section provides a brief explanation regarding driver installation.
Follow the guidelines in the IBM LAN Adapter and Protocol Support
Configuration Guide for more details about installing the PCnet Family driver
from the LAN Disk.

Installation Procedure

To install the driver for IBM LAN Services 4.0 (LAN Requester), follow these steps:
1 Insert the LAN Disk into the flexible disk drive.
2 Open the LAN Services folder (or run "MPTS").
3 Run OS/2 LAN Services Installation/Configuration.
4 When the Basic or Advanced Installation/Configuration dialog box is displayed,
choose .
Advanced
5 When the Install Type dialog box is displayed, choose
workstation.
6 When the Installation and Configuration dialog box is displayed, choose
Configure a component
7 When the Configure dialog box is displayed, choose
and choose
Support
8 In the LAPS Configuration dialog box, choose Other Adapters.
68 English
. Then choose .
OK
. Then choose
Configure
Install or Configure
LAN Adapter and Protocol
.
OK
this