Installing Microsoft Network Drivers - HP Vectra VL6 7 Administrator's Manual

3 Installing Microsoft Network Drivers

Installing Microsoft Network Drivers
Installing Microsoft Network Drivers
This document explains how to install the network drivers required to use the PC
with a network.
•
•
If you want to use the PC as a LAN Manager client,
Client Driver" on page
If you want to use the PC under Windows for Workgroups,
Windows for Workgroups 3.1" on page 49
for Workgroups 3.11" on page
If you want to use the PC under Windows NT,
on page 52
If you want to use the PC under Windows 95,
page
NOTE Before installing the network drivers, connect the HP Ethernet Family Adapter to
the LAN and set up (configure) the HP Ethernet Family Adapter.
HP LAN drivers are supported on Vectra PCs only. This does not apply to drivers for
Microsoft Windows NT 4.0 and Microsoft Windows 95.
44
If the PC is supplied with a LAN Disk, use this to install the LAN drivers.
If the PC has preinstalled software on the hard disk, the LAN drivers are supplied
on the PC's hard disk in subdirectories in the
46.
or "Miniport Driver for Windows NT" on page
55.
English
\LANDRV
"LAN Manager 2.x DOS and OS/2
or "NDIS 2.01 and 3.0 Drivers for Windows
50.
"NDIS 3.0 Driver for Windows NT 3.5"
"NDIS 2.01 and 3.1 for Windows 95" on
directory.
"NDIS 2.01 Driver for
53.