Artisoft Lantastic Keywords - HP Vectra VL6 7 Administrator's Manual

Artisoft LANtastic Keywords

Keyword
Syntax
Name
I/O Address IOBASE Described previously in
Family Adapter" on page 98.
Interrupt IRQ
DMA DMA
@switch-file @switch-file Specifies that further switches are to be
taken from a switch file. Any switches after
the @switch-file name will be used, and the
switch settings take precedence over any
settings in the switch file. Switch files may
be invoked from within switch files.
HELP HELP Instructs PCNTLC.EXE to display information
about the valid command line switches. For
example: PCNTLC /Help
VERBOSE VERBOSE Causes the PCNTLC.EXE driver to be
installed and detailed information about the
configuration of the PCNTLC.EXE driver to
be displayed. Refer to the messages section
of the LANtastic manual for a detailed
description of the VERBOSE output.
REMOVE REMOVE This command removes the PCNTLC.EXE
driver from memory. TSR programs must be
removed in the opposite order they were
loaded. For example if PCNTLC.EXE was
loaded followed by AILANBIO, then
AILANBIO must be removed before PCNTLC.
BUSTYPE BUSTYPE Described previously in
Specific Keyword Matrix" on page 96.
Multiplex MPX Command used for a communications
Interrupt interface between TSR programs
Description Range
"Common Keyword Matrix for the HP Ethernet
N/A
N/A
N/A
N/A
"PCNET Driver- 00(ISA)
01(PnP)
10(VESA)
11(PCI)
12(PCI1)
13(PCI2)
C0-FF h
6 Driver Options - Software Keywords
Operating System Keywords
Default
None
Not
Enabled
Not
Enabled
Not
Enabled
Not
Present
C7
English 101