Ndis 3.0 Driver For Windows Nt 3.5; Installation Procedure - HP Vectra VL6 7 Administrator's Manual

3 Installing Microsoft Network Drivers

NDIS 3.0 Driver for Windows NT 3.5

NDIS 3.0 Driver for Windows NT 3.5
The LAN Disk also includes the NDIS 3.0 driver for the Windows NT environment.
The directory structure provided on the LAN Disk has been set up for automatic
installation. This section provides a brief explanation regarding driver installation.
Follow the guidelines in the Microsoft Windows NT User's Guide for more details
about installing the PCnet Family driver from the LAN Disk.

Installation Procedure

To install the PCnet NDIS 3.0 driver, simply follow the instructions given below to
navigate through the menu driven functions in Windows NT.
1 Insert the LAN Disk into the system's flexible disk drive.
2 From the Control Panel in the Windows NT Main window, double click on the
Network icon to install the HP Ethernet Family Adapter.
3 In the Network Settings dialog box, choose
4 In the Add Network Adapter dialog box, select the adapter card list menu and
Select
<Other> Requires disk from manufacturer
5 In the next window, specify the drive letter and path for the files.
For example:
A:\WINNT3X\
6 Select the
HP Ethernet Family Adapter with LAN Remote Power
dialog box.
7 Verify that the BUS_TO_SCAN parameter is set to PCI1 for an HP Ethernet
Family Adapter.
For the HP Ethernet Family Adapter, no I/O address, IRQ or DMA channel
values need to be specified.
8 Close the Setup dialog box and exit from the Add Network adapter dialog box to
complete the installation. Follow any subsequent instructions from Windows NT
to reboot your system, if required.
For additional guidelines, refer to the Microsoft Windows NT documentation.
52 English
.
Add Adapter
from the list.
from the