Initializing The Camera Head Position - Canon VB-C50i/VB-C50iR User Manual

Initializing the Camera Head Position

If the preset position is misaligned, you can correct it by initializing the camera head position.
When the camera head position is initialized, the camera head moves to face front, and then
moves back to the current position.
Start initializing
○ ○ ○ ○ ○ ○
To Make Settings...
1. Launch the Web browser and enter the following URL:
http://192.168.100.1/support/
*
The underlined portion is a sample IP address. Enter the actual IP address set for the VB-C50i/VB-
→
C50iR( P.3-6).
You need the IP address, user name, and the administrator password for this camera to
display the Initialize Camera Head Position page(→ P.3-5).
2. In the Initialize Camera Head Position, perform necessary settings.
q Manual
The camera head position is immediately initialized by clicking the "Initialize" button.
1:1.6-4.0 f:3.5-91mm
CAMERA NETWORK
VB-C50i
End initializing
q
w
7-23