Canon VB-C50i/VB-C50iR User Manual page 95

o Speed (Z)
Sets the speed at which the camera moves when zooming, within a range of 1-8. By moving
the slide bar from left to right, the numeric value becomes larger and the speed increases.
!0 Pause (sec)
Sets the time for which the camera pauses in the preset position, within a range of 0-120
seconds in units of five seconds.
If the following warning message appears on your screen, please consider changing
your settings based on the list below.
Note
Example of a warning screen
Duration of the tour in the screen changes depend on the setting.
Click Cancel button to return to the setting screen.
Click OK button to save the set value.
(Please click Save button on the setting page when you are setting from preset setting tool.)
Durability for Pan/Tilt machine is about 0.1 million times.
*1 time = Full pan angle (680°) movement
Since total tour time depends on the combination of speed, range and paused time,
please set the value by referring to the list below.
Total preset tour time until reaching approx. 0.1 million times.
Setting Speed (PT) to 1
Pause time Range of Pan movement (degree)
(sec)
0
10
20
30
Example: Speed (PT):1, Pause time: 30 seconds, Pan moving range (Angle): ±50°=
9,444 hours (approx. 0.1 million times (return))
Preset Tour does not operate when the camera is being controlled with the Viewer
for PC, or the Admin Viewer and so on.
Tip
±50 ±100 ±150
3872 3825 3809
5666 4722 4407
7555 5666 5037
9444 6611 5666
Values are in hours
Setting Speed (PT) to 2
Pause time Range of Pan movement (degree)
(sec)
±50
0 1983
10 3777
20 5666
30 7555
Values are in hours
Preset Setting Tool
±100 ±150
1936 1920
2833 2518
3777 3148
4722 3777
4-25