Canon VB-C50i/VB-C50iR User Manual page 129

Relationship between ON and OFF events and picture/audio
recording*
Tip
* Only available with two particular models (→ P.iii)
ON
OFF
Picture Recording
Audio recording
The figures below show the methods (A-D) of picture and audio recording that use
motion detection and external device input based on the timing of ON and OFF events.
OFF ON
A: Pre-event recording for an ON event
Pictures: For 0-10 seconds at intervals of 0.1-1.0 seconds
Audio: For 0-10 seconds
ON OFF
C: Pre-event recording for an OFF event
Pictures: For 0-10 seconds at intervals of 0.1-1.0 seconds
Audio: For 0-10 seconds
● For A and C, recording is controlled to the pre-event recording time, and for B and D,
it is controlled to the post-event recording time.
● If you select "Recording between ON event and OFF event" in the motion detection
settings, you can also record pictures during ON events (between B and C) (→ P.4-
47).
● If you select "Enable audio recording concurrently with picture", you can record audio
for the time specified for picture recording (→ P.4-47).
A B C D
OFF ON
B: Post-event recording for an ON event
Pictures: For 0-10 seconds at intervals of 0.1-1.0 seconds
Audio: For 0-10 seconds
ON OFF
D: Post-event recording for an OFF event
Pictures: For 0-10 seconds at intervals of 0.1-1.0 seconds
Audio: For 0-10 seconds
Schedule Setting Tool
4-59