Table of Contents
Advertisement
PHILIPS 4000 and 3000
7.4.
Coffee grinder adjustment
Adjustment by a service center
C
To adjust grinding further, the engineer can work directly on the coffee grinder by pressing and turning
the ring nut (C) shown. (clockwise
decrease it).
If there are any remains of coffee powder between the two grinding blades it is recommended to
tighten by max. two marks at a time.
Lastly, move the arrow (A) on the adjustment knob to the center of the adjustment dots on the
cover (B).
7.5.Carafe connection and hot/steam water dispenser
Slide out the fork
as illustrated
The grinding adjustment can be set by the user (only with the cof-
fee grinder in operation) by pressing and turning (only by one click at
a time) the insert inside the coffee bean hopper with the aid of the
wrench supplied.
+
to increase the particle size of the coffee and anticlockwise
Loosen the screws holding
the carafe connection
A
B
When reassembling the assembly to be
careful to correctly position the spring.
07 DISASSEMBLY
-
to
4/9
Advertisement
Table of Contents
