Coffee Grinder Adjustment - Philips 4000 Service Manual

PHILIPS 4000

7.4. Coffee grinder adjustment

For HD Models UP TO S/N.TW901645704031 the grinding
adjustment can be set by the user (only with the coffee grinder
in operation) by pressing and turning (only by one click at a
time) the insert inside the coffee bean hopper with the aid of
the wrench supplied.
Adjustment by a service center
To adjust grinding further, the engineer can work directly on the coffee grinder by pressing and turning the ring nut
(C) shown. (clockwise
If there are any remains of coffee powder between the two grinding blades it is recommended to tighten by max.
two marks at a time.
Lastly, move the arrow (A) on the adjustment knob to the center of the adjustment dots on the cover (B) for HD
Models UP TO S/N.TW901645704031, instead for HD models from S/N.TW901645704032 and for EP models
ascertain that the center line of the "PRESS" (D) is in correspondence of the fin (E).
C
+ to increase the particle size of the coffee and anticlockwise
Turn the grinder blades clockwise out of the support. The bayonet
connections can be accessed from the rear.
For a standard adjustment, both markings must be aligned.
A
B
For HD Models from S/N.TW901645704032
and for EP models the grinding adjustment
can be set by the user pressing and turning
the grinder adjustment knob
E
- to decrease it).
07 DISASSEMBLY
D
3/7