Coffee Grinder Adjustment - Philips 5000 Service Manual

PHI 5000
7.5.

Coffee grinder adjustment

For 120V Models the grinding adjustment can be set by the
user (only with the coffee grinder in operation) by pressing
and turning (only by one click at a time) the insert inside the
coffee bean hopper with the aid of the wrench supplied.
Adjustment by a service center
To adjust grinding further, the engineer can work directly on the coffee grinder by pressing and turning the ring nut
(C) shown. (clockwise
If there are any remains of coffee powder between the two grinding blades it is recommended to tighten by max.
two marks at a time.
Lastly, move the arrow (A) on the adjustment knob to the center of the adjustment dots on the cover (B) for all
120V Models , instead for 230V Models ascertain that the center line of the "PRESS" (D) is in correspondence
of the fin (E).
C
+ to increase the particle size of the coffee and anticlockwise
For a standard adjustment, both markings must be
aligned.
For 230V Models the grinding adjustment
can be set by the user pressing and turning
the grinder adjustment knob
A
B
08 DISASSEMBLY
E
- to decrease it).
D
5/7