Philips 4000 Service Manual page 44

PHILIPS 4000 and 3000
Page 1 (KEYBOARD)
ERROR: If nothing appears on display; check the interface board and the flat cable (JP21).
ERROR: If during the movement the backlight remain green check the wiring (JP1) from the in-
terface board and the display.
ERROR: The name displayed is wrong; check the position of jumper in interface. It must be the
same of machine model.
Page 2 (INPUTS)
Start condition
Press buttons from 1 to 7
Only when a button is pressed a O appears on the relative position of
button pressed.
In the middle of display appears the name of the button pressed.
Pressing buttons on the left the backlight color changes from
GREEN to YELLOW.
Pressing button on the right the backlight color changes from
GREEN to RED.
When a button is pressed, also the Stand-By led (RED) turn ON.
Note: Press button Z7 as the last once, since it makes
change the test page.
Note: If 2 or more buttons are pressed the name that appears
on display could be wrong.
Press Z7 " " to move to the next screen
The machine passes to the level 2 (INPUTS)
Start condition
Warning: if the Lever sensor is not connected to interface will
appear a warning message.
05 SERVICE MODE
3/18