SWITCHING POWER ON/ OFF
Turn the Power switch/ Volume control clockwise to switch the transceiver power
ON.
•
The Power on text appears if the Power on text has been set.
Turn the Power switch/ Volume control counterclockwise to switch the transceiver
power OFF.
ADJUSTING THE VOLUME
Rotate the Power switch/ Volume control to adjust the volume.
Rotate clockwise to increase the volume and counterclockwise to decrease the
volume.
SELECTING A ZONE AND CHANNEL
1
Select the desired zone using the Selector (programmed as [Zone Up/Down]
or [Zone Select]) or buttons programmed as [Zone Up]/ [Zone Down].
•
Each zone contains a group of channels.
2
Select the desired channel using the Selector (programmed as [Channel
Up/Down] or [Channel Select]) or buttons programmed as [Channel Up]/
[Channel Down].
•
Each channel is programmed with settings for transmitting and receiving.
•
The transceiver may have names programmed for zones and channels.
The zone name and channel name can contain up to 8 characters
respectively. While selecting a zone, the zone name appears for 2 seconds
(if Zone Name Display is set), then channel name appears.
BASIC OPERATIONS
12