Kenwood NX-1300DE3 User Manual page 37

Individual [Analog/ NXDN/ DMR]
Activates Individual Call Mode.
1 PF Button:
Press the programmed button to enter Individual Call Mode
(NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200).
Menu Mode:
Call Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200).
2 Press the [ <B ] and [ C> ] buttons to select a Unit ID/ name from the list that
has been programmed to your transceiver.
3 Press and hold the PTT switch to make the call.
NXDN/ DMR:
Refer to "Making Individual Calls (NXDN/ DMR)" {p. 14}.
FleetSync:
Refer to "FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION" {p. 76}.
Individual + Short Message
Allows you to specify a Unit ID to send short messages.
1 PF Button:
Press the programmed button to enter Individual Call Mode
(NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200).
Menu Mode:
Call Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200).
2 Press the [ <B ] and [ C> ] buttons to select a Unit ID/ name from the list.
3 Press the [ S ] button to enter Short Message Mode.
4 Press the [ <B ] and [ C> ] buttons to select a Short Message from the list
(NXDN/ DMR).
5 Press the PTT switch or Side 2 button to send short messages.
Select "IND MODE" and press the [ S ] button to enter Individual
[Analog/ NXDN/ DMR]
Select "IND SDM" and press the [ S ] button to enter Individual
37