Kenwood NX-1300DE3 User Manual page 31

Display Format
Allows you to switch the display between the zone-channel number and the
channel name.
PF Button:
Press the programmed button to switch the display between the zone-channel
number and the channel name.
Menu Mode:
Select "DISP FMT" and press the [ S ] button to change the Display Format
setting.
Emergency [Analog/ NXDN/ DMR]
This is for entering Emergency Mode if the transceiver is in standby mode. If the
transceiver is in Emergency mode, it exits the emergency mode. In Emergency
Mode, the transceiver repeats transmission and reception at regular intervals.
PF Button:
Press and hold the programmed button for the time set in hold delay to enter
Emergency Mode.
• If transceiver is in Emergency Mode, press and hold this button for the time
set in Hold Delay to exit Emergency Mode.
Refer to "EMERGENCY CALLS" {p. 71}.
[Analog/ NXDN/ DMR]
Zone-channel number
Channel name
31