Kenwood NX-1300DE3 User Manual page 34

Group [Analog/ NXDN/ DMR]
Activates Group Call Mode.
1 PF Button:
Press the programmed button to enter Group Call Mode (NXDN/
DMR) or Selcall Mode (FleetSync/ MDC-1200).
Menu Mode:
Call Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200).
2 Press the [ <B ] and [ C> ] buttons to select a Group ID/ name from the list
that has been programmed to your transceiver.
3 Press and hold the PTT switch to make the call.
NXDN/ DMR:
Refer to "Making Group Calls (NXDN/ DMR)" {p. 13}.
FleetSync:
Refer to "FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION" {p. 76}
Group + Short Message
Allows you to specify a Group ID to send short messages.
1 PF Button:
Press the programmed button to enter Group Call Mode (NXDN/
DMR) or Selcall Mode (FleetSync/ MDC-1200).
Menu Mode:
Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200).
2 Press the [ <B ] and [ C> ] buttons to select a Group ID/ name from the list.
3 Press the [ S ] button to enter Short Message Mode.
4 Press the [ <B ] and [ C> ] buttons to select a Short Message from the list
(NXDN/ DMR).
5 Press the PTT switch or Side 2 button to send short messages.
Select "GRP MODE" and press the [ S ] button to enter Group
[Analog/ NXDN/ DMR]
Select "GRP SDM" and press the [ S ] button to enter Group Call
34