Table of Contents
Advertisement
5. When you are finished, press
Note:
When neither party has the floor during a PCS Ready Link call,
Floor is open.
"
the PCS Ready Link call ends automatically.
Tip:
If you press
standard voice call.
Making a PCS Ready Link Call (Group Call)
You can make a PCS Ready Link call to all members in a Group entry
in your PCS Ready Link List. You can communicate with up to five
members at a time.
To place a PCS Ready Link Group Call:
1. Press R-Link (left softkey) or press
Link List.
2. Press Go to (left softkey), highlight the list from which you want
to make a Group call (Co. Groups or Per. Groups), and press
3. Highlight the group you want to call, and press and hold
place the call and take the floor. (You will see R-Link calling... and
Connecting... followed by "You have floor." Continue with the
PCS Ready Link call as described on the previous page.)
To display the group members details, press
your desired group member, then press View (left softkey)
during step 3 above.
If one of the group members takes the floor, you will see
the member's name and PCS Ready Link number on the
display (if applicable). The phone beeps if you press the
Ready Link button when another contact has the floor.
4. When the call is finished, press
Tip:
You can also make a 1-to-1 call by selecting a group member from the Group
list. From step 3 above, press
and hold
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics
" appears on the display. If no one takes the floor for 20 seconds,
or
during step 3 on the previous page, you can make a
.
.
.
, select your desired group member, and press
to access the PCS Ready
, highlight
.
to
30
Advertisement
Table of Contents
