Selecting A Ringer/Image Type For An Entry - Sanyo Sprint SCP-5400 User Manual

Selecting a Ringer/Image Type for an Entry

You can assign a ringer/image type to a Contacts entry so you can identify
the caller by the ringer or image type. (See "Ringer Types" on page 43.)
To select a ringer/image type for an entry:
1. Press
2. Select the entry for which you want to set the incoming ringer
or image and press
3. Highlight a phone number and press Options (right softkey),
highlight Edit, and press
– or –
Highlight an Email address or Web address, and press Edit (right
softkey).
4. Select the menu under Ringer or Image by scrolling up or down
and press
5. Highlight your desired ringer type or image and press
Ringer & Voice to notify you with Ringer and Voice. (Ringer
only.)
Vibrate to notify you by vibrating. (Ringer only.)
Get New to start up the browser and you can select an item
to download.
Normal to use the current With Caller ID or Roaming setting
for Ringer (see page 43) or to use the current Incoming
Calls setting for Image (see page 52).
None to turn the ringer/image setting off.
6. Press Save (left softkey).
To confirm the ringer, highlight Ringer and press Play (right
softkey).
To see a display preview, press Preview (right softkey)
during step 5 above. Then press Sub LCD (right softkey) to
see the Sub LCD preview. (You may also check the image
through the external display.)
If you set an animation ringer (indicated with
an image, your PCS Phone plays the ringer (audio) of the
animation ringer and displays the image you selected.
You need to have downloaded data to set image.
Section 2: Understanding Your PCS Phone
2G: Using the Contacts Directory
on the Navigation key.
.
.
.
.
icon) and
95