Table of Contents
Advertisement
Finding an Entry in the PCS Ready Link List
You can find your desired entry by entering a few letters.
To find a PCS Ready Link entry:
1. Press R-Link (left softkey) or press
Link List.
2. Press Go to (left softkey), highlight your desired list (Company
List, Co. Groups, Personal List, or Per. Groups), and press
3. Enter the first letter or the first few letters of the name.
(See page 87 for the entering method.)
The display shows the list beginning with the letter(s) you
entered.
4. Scroll through the list and press
Adding a New Contact to Your Personal List
You can store a total of 200 entries in the Personal List/Per. Groups.
To add a new PCS Ready Link contact:
1. Press R-Link (left softkey) or press
Link List.
2. Press Go to (left softkey), highlight Personal List, and press
3. Highlight <New Contact> and press
– or –
Highlight an entry and press Options (right softkey). Then
highlight New Contact and press
If the Personal List is full or if you are not authorized to edit
the Personal List, you will see a warning message on the
display.
4. Enter a name for the new contact and press
name you will see when calling or receiving a call from the
contact.)
5. Highlight the R-Link Number field and press
contact's PCS Ready Link number and press
6. Press Save (left softkey) to save the new contact to your
Personal List.
Tip:
You are not allowed to use the following symbols during step 4: ":", "@", ";",
"/", "*", ")", and "(".
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics
to access the PCS Ready
to select your desired entry.
to access the PCS Ready
.
.
. (This is the
. Enter the
.
.
.
36
Advertisement
Table of Contents
