INTRODUCTION
CHECK THE CONTENTS OF THE BOX
Box should contain:
l
Handset with handset cord and phone base
l
Four 1.5V AA size batteries
l
Support bracket
l
Telephone line cord
l
User's manual
l
Warranty card
BATTERY INSTALLATION
The Caller ID phone requires four 1.5V AA size batteries for LCD display.
1. Remove the battery cover from the back of your Caller ID phone
2. Insert four AA size 1.5V batteries by observing the +/- polarity
marked in the compartment.
3. Replace battery compartment cover.
NOTE:
You can also insert adapter for LCD display (optional).
CONNECTING LINE CORDS
Plug one end of the supplied modular cord into the line jack. Then
plug the other end into telephone line jack.
3
RECEIVING CALL RECORDS
A caller ID record consists of the following information:
9:52 9/12
02
NEW
TOTAL 04 MON
02
9:52 9/12
CALL #
12274612345
JOHN SMITH
REVIEWING DISPLAY MESSAGES
msg
LOW
MESSAGE WAITING
- If you have voice mail
service from your telephone company and
a recorded message is left, the screen will
display
MESSAGE WAITING
. The
appear in the upper left corner. The icon
will remain until you have retrieved your
voice mail and the MESSAGE WAITING will
be saved as a call.
*NOTE: This function should be
supported by your telephone company.
The total number of new calls
Time and Date
Total number of calls and
the week day
The serial number of caller list
Caller's number
Caller's name
REPEAT
msg
9:52 9/12
02
CALL #
MESSAGE WAITING
MSG
will
12