Contacts List Entry Options - Sanyo Sprint SCP-5400 User Manual

Contacts List Entry Options

To access a Contacts entry's options, display the Contacts list,
highlight an entry and press
press Options (right softkey). (See "Finding Contacts List Entries" on
page 92.)
To select an option, highlight it and press
Edit to edit the selected entry.
Call to dial the selected number.
Call:Speaker On to dial the phone number in speakerphone mode.
Call Alarm to set a call alarm for the entry. (See page 101 for call
alarm.)
Set Speed Dial to assign speed dial numbers to your favorite
entries. (See page 62 for Speed Dialing.)
Set Voice Dial to set a voice dial for the entry. (See page 120 for
Voice Dial.)
Prepend to alter a phone number by adding numbers. (See
page 84 for prepending.)
Copy to Personal to copy the phone number to Personal List.
Note:
The "Copy to Personal" option is displayed when meet all of the following
conditions. PCS Ready Link mode is set to Enable; the phone number is 10 digits
or 11 digits beginning with 1; the phone number does not match any stored entry
in Personal List; the phone is not in use.
Tip:
You can view the next entry by pressing
previous entry by pressing
To erase the selected entry from the Contacts list.
1. Press
2. Highlight the contact you want to erase and press Options (right
softkey).
3. Highlight Erase Contact and press
4. Select Yes and press
Section 2: Understanding Your PCS Phone
2G: Using the Contacts Directory
on the Navigation key.
on the Navigation key to display the Contacts list.
, then select a phone number and
on the Navigation key or view the
.
.
.
86