How you are guided
Starting guidance to the destination or via point
1
Select a destination or via point. (☞ pages 18
to 27)
2
To set as destination
To set as via point
You can add the via points only after selecting your
destination.
The System starts calculating the route to the selected
destination, and guidance starts.
EN_KW-NT500HDT_NT300[J].indb 29
EN_KW-NT500HDT_NT300[J].indb 29
3
. Select a route (1), then press [OK](2).
The estimated time and distance to the destination are
displayed.
If the route includes toll roads, the toll the first and last
interchange names are also displayed.
[Fastest]:
The recommended route.
[Shortest]:
The shortest route.
[Freeway]:
The recommended route when using
freeways.
[Avoid Freeway]: The recommended route when not
using freeways.
[All]:
All routes.
To cancel guidance, ☞ page 29.
29
12/7/2011 1:06:06 PM
12/7/2011 1:06:06 PM