Bluetooth Device Settings - JVC KW-NT500HDT Instructions Manual

Bluetooth device settings

For Bluetooth mobile phone
1
Menu items
Phone Connection
Audio Connection
PIN Code
Device Name
Device Address
Auto Connect
Auto Answer*
BT Audio
EN_KW-NT500HDT_NT300[J].indb 104 EN_KW-NT500HDT_NT300[J].indb 104
Selectable settings
Connect: ☞ page 80
Disconnect: ☞ page 80
Connect: ☞ page xx
Disconnect: ☞ page xx
Displays the PIN code of the unit.
• To change the PIN code, press [Change], enter a new PIN code, then press [OK].
Shows the device name to be shown on the Bluetooth device — "KW-NT500HDT" or
"KW-NT300".
Shows the MAC address of the unit.
On: The connection is automatically established with the last connected Bluetooth
device when the unit is turned on.
Off: Cancels.
On: The unit answers the incoming calls automatically.
Off: The unit does not answer the calls automatically. Answer the calls manually.
On: Select when playing the Bluetooth audio device using "Bluetooth" as the source.
Off: Select when playing back iPhod/iPhone using "iPod" as the source.
104
2
Initial: Underlined
12/7/2011 1:06:40 PM 12/7/2011 1:06:40 PM