Changing/Clearing The Security Password - JVC KW-NT500HDT Instructions Manual

6
Enter the same security code, then press [OK].
• After setting the security password, entering the
security code is necessary each time you turn on
the unit.
EN_KW-NT500HDT_NT300[J].indb 13 EN_KW-NT500HDT_NT300[J].indb 13
Changing/clearing the security
password
Repeat steps 1 to 3 on page 12.
1
2
Enter the current security code, then press
[OK].
If you want to clear the security code, stop here.
The security code has been cleared.
If you want to change the security code, go to the
next step.
3
Enter the new 4-8 digit security code, then
press [OK]
4
Enter the same security code, then press [OK].
13
Basic operations
12/7/2011 1:05:59 PM 12/7/2011 1:05:59 PM