By Navicon <Iphone App - JVC KW-NT500HDT Instructions Manual

Searching for a place
By NaviCon <iPhone App>
When you connect your iPhone with the "NaviCon" application installed to the system, you can manipulate the map,
search and set destinations on the system using the iPhone screen.
Sending registered information to the
system and setting as destinations
1
Search for "NaviCon" in the Apple iTunes App
Store to find and install the latest version of
the NaviCon application to your device.
2
Connect your iPhone to the system.
Be sure your iPhone is connected to the Internet.
3
Activate "NaviCon" on the iPhone.
4
Transfer registered information from the
iPhone to the system.
For information about transfer operations, refer to
the NaviCon instructions.
Registered points are displayed on the navigation
screen.
• To start guidance, ☞ page xx.
EN_KW-NT500HDT_NT300[J].indb 28 EN_KW-NT500HDT_NT300[J].indb 28
Manipulate the map on the system from
"NaviCon"
When you connect your iPhone to the system, the map
on the iPhone screen also appears on the navigation
screen.
When you scroll the map on NaviCon, the map on the
navigation screen also scrolls in synchronization.
Zooming in on the map is also shown on the navigation
screen.
Zooming in/out
Scrolling
28
12/7/2011 1:06:06 PM 12/7/2011 1:06:06 PM