Canon VB-730F Mk II Operation Manual page 66

Using Presets or the Home Position
You can use a registered preset or home position to specify the range for Digital PTZ.
If you select a preset, the preview frame on the Digital PTZ panel moves to the preset position, and the video inside
the frame is shown in the video display area.
Note
Register presets in advance in [Camera] > [Preset] > [Register Preset] on the Setting Page (P. 118).
Exiting Digital PTZ
The Digital PTZ exits if you perform one of the following operations.
• Click the [Digital PTZ] button to disable it.
• Click the [Viewer PTZ] button to start the Viewer PTZ.
Note
You can perform the following operations to continue Digital PTZ while the [Digital PTZ] button is active (purple).
– Click the [Close] button on the control display area to close the Digital PTZ panel.
– Click the snapshot tab or panorama display tab (
66
H730 S80x S90x
HM4x S30 S31
) to switch the panel in the control display area.