Canon VB-730F Mk II Operation Manual page 220

S017 qtimer service started or shut down
[info]
Description
%1
Meaning
S070 Change to certificate [info]
Description
%1
%2
Meaning

wvhttp notification
W001 Starting and stopping of system [info]
Description
%1
Meaning
W030 Startup and shutdown of WebView
Livescope Client [info]
Description
%1
%2
Meaning
W031 Transmitted video data size [info]
Description
%1
Meaning
220
%1 qtimer (S017)
(starting) or (stopping)
The qtimer service was started or shut
down.
%1: succeeded to %2 certificate
(S070)
ssl or 802.1X
generate | load | delete | restore
A certificate was generated/loaded/
deleted/restored
%1 webview (W001)
Starting or stopping
wvhttp server (webview) has started or
stopped.
%1%2 host=<Host>, user=<User>,
prio=<Priority>(W030)
W: WebView session, V: Session-less
video client, N: Session-less event
client
+: Connect, -: Disconnect
The camera server client was
connected or disconnected.
%1= host=<Host>, user=<User>,
video=<jpg|h264>:<Number of
frames> (W031)
W: WebView session, V: Session-less
video client
When a client disconnected, the total
data that was sent to the client is
displayed in number of frames.
W040 Clearing to external memory [info]
Description %1 the image storing - %2 (W040)
%1 Starting or stopping
%2 Reason for starting/stopping
Meaning Started or stopped clearing stream
recording to external memory.

Audio server notification
B001 Starting and stopping of audio server
[info]
Description %1 audio. (B001)
%1 starting | stopping
Meaning The audio server was started/shut
down.
B011 Audio client connected [info]
Description [%1] %2 connected n=%3 (B011)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was connected.
B012 Audio client closed [info]
Description [%1] %2 closed n=%3 (B012)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was disconnected.

Camera application notification
C001 Starting and stopping of camera control
module [info]
Description %1 camerad (C001)
%1 starting | stopping
Meaning The camera control module started/
stopped.
C002 Camera application started and
stopped [info]
Description starting cameraappl (C002)
Meaning The camera application started.