Canon VB-730F Mk II Operation Manual page 125

Note
If a preset has already been added to [Edit Tour Route] when another preset is added from [Preset List], the added preset will be
displayed below the preset selected in [Edit Tour Route].
Configure the preset speed and pause duration.
6
Select the preset to configure in [Edit Tour Route] and set the tour operation.
HM4x
[Speed (PT)]
Select the camera pan/tilt speed for moving to the next preset.
HM4x
[Speed (Z)]
Select the camera zoom speed for moving to the next preset.
[Pause (sec)]
Enter the time the camera pauses at the preset position.
HM4x
Note
If you want to view video during moves between presets, select a slow speed. If you only want to switch quickly to view video at the
preset positions, select a fast speed.
7 Click [Apply].
Click [Apply] after configuring the route. The setting will be saved to the camera.
Note
Click [Clear] to set the route again. The settings saved in the camera are restored. However, note that presets only added to the
[Edit Tour Route] by clicking [Add] are all discarded.
5
125