Camera Settings - Canon VB-730F Mk II Operation Manual

S30 S31
If you select [Do Not Register], the camera angle will move to the home position the next time it is booted. If you have not
specified the home position, the camera angle will move to the factory default setting. For information on specifying the
home position, please refer to P. 118.
HM4x S30
Note
When [Digital PTZ Position] is set to [Do Not Register], you can perform pan, tilt, and zoom operations on the video display area using Area
Zoom (P. 58).
[Digital PTZ Position]
Register the current digital PTZ position as the initial setting.
If you select [Register], a yellow frame is shown in the video display area. Operate the frame to specify the Digital PTZ trim
position during startup.
Note
The Digital PTZ trim frame (yellow) displayed during startup can be set to incremental sizes. The sizes that can be set are the same as the
Digital PTZ of the Viewer (P. 65).

Camera Settings

Sets the camera settings at camera start up.
[Simple Camera Settings]
Recommended settings for [Camera Settings] are displayed according to the selected type (The table below shows the
items and their differing recommended values). You can also change the recommended settings as required and click
[Apply].
Type
Usage scenario
[Exposure]
[AGC Limit]
[Shutter Speed
Limit (Lower)]
[Shutter Speed
Limit (Upper)]
[Smart Shade
Control]
[Noise Reduction]
[Sharpness]
[Color Saturation]
[Haze
Compensation]
100
S31
Depth Priority
Motion Priority
HM4x H730
Reduces Focuses within a
vibrations for wide range, from
moving subjects. near to far.
Auto (Aperture-
Auto
priority AE)
6 6
HM4x H730
1/1000 (sec.)
S30 S31
1/30 (sec.)
S80x S90x
1/250 (sec.)
1/16000 (sec.) 1/16000 (sec.)
Disable Disable
Mild Standard
3 6
4 4
Disable Disable
Data Size
Low Light Visibility
Reduction
Brightens by
Reduces the data
raising the
size in low-light
sensitivity for dark
conditions.
subjects.
Auto Auto
6 4
1/8 (sec.) 1/8 (sec.)
1/16000 (sec.) 1/16000 (sec.)
Disable Disable
Strong Strong
3 3
4 2
Disable Disable
Standard Settings
Cancels the
scenario settings
and restores the
factory default
settings.
Auto
6
1/30 (sec.)
1/16000 (sec.)
Disable
Standard
3
4
Disable